Dynasonics TFXP Series Transit Time Ultrasonic Flow Meter Manuel d'utilisateur Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 132
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
Rev. 5/09 -1.4- TFXP
This manual contains detailed operating instructions for all aspects
of the TFXP instrument. The following condensed instructions are
provided to assist the operator in getting the instrument configured
and measuring as quickly as possible. This pertains to basic
operation only. If specific instrument features are to be used or if
the installer is unfamiliar with this type of instrument, refer to the
appropriate section in the manual for complete details.
1. TRANSDUCER LOCATION
A. In general, select a mounting location on the piping system
with a minimum of 10 pipe diameters (10 × the pipe inside
diameter) of straight pipe upstream and 5 straight diameters
downstream. See Table 2.1 on page 2.3 for additional
configurations.
B. Select a mounting method for the transducers based on pipe
size and liquid characteristics. See Table 2.2 on page 2.5.
Transducer mounting configurations are illustrated in
Figure 1.2.
C. Enter the following data into the TFXP transmitter via the
integral keypad or ULTRALINK™ software utility.
D. Record the value calculated and displayed as Transducer
Spacing (XDCR SPC).
Transducer
Location
QUICK-START OPERATING INSTRUCTIONS
1. Transducer mounting method
2. Pipe O.D. (outside diameter)
3. Pipe wall thickness
4. Pipe material
5. Pipe sound speed ¹
6. Pipe relative roughness ¹
7. Pipe liner thickness (if present)
8. Pipe liner material
(if present)
9. Fluid type
10. Fluid sound speed ¹
11. Fluid viscosity ¹
12. Fluid specific gravity ¹
¹ Nominal values for these
parameters are included
within the TFXP operating
system.
The nominal values may be
used as they appear or may
be modified if exact system
values are known.
Figure 1.2 — Transducer Mounting Configurations
Vue de la page 5
1 2 3 4 5 6 7 8 9 10 11 ... 131 132

Commentaires sur ces manuels

Pas de commentaire